AD/B767/207 - APU and Engine Fire Shutoff Switches (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Boeing 767 Series Aeroplanes AD/B767/207 APU and Engine Fire Shutoff Switches 3/2005

Applicability: Model 767-300 series aeroplanes; as listed in Boeing Alert Service Bulletin (ASB) 767-26A0127 dated 17 July 2003. Requirement: 1. Carry out a functional test of the Auxiliary Power Unit (APU) and engine fire shutoff switches, in accordance with ASB 767-26A0127. 2. If any APU or engine fire shutoff switch fails during any functional test required by Requirement 1 or 5.a. replace the switch with a new or serviceable switch, in accordance with ASB 767-26A0127. 3. Replace all APU and engine fire shutoff switches, that have not been previously replaced in accordance with Requirement 2, with new or serviceable switches in accordance with ASB 767-26A0127. Note 1: The Requirement 1 repetitive functional tests and the Requirement 2 and 3 repetitive switch replacements may be optionally terminated if the Lucas (also known as TRW Systemes Aeronautiques) humidifier, part number (P/N) M01AA0101, M01AB0101, M01AB0102 or M01AB0103 are deactivated. 4. For any aeroplane on which Lucas humidifier, P/N M01AA0101, M01AB0101, M01AB0102 or M01AB0103 is deactivated - Replace all APU and engine fire shutoff switches with new or serviceable switches in accordance with ASB 767-26A0127. 5. For any aeroplane on which Lucas humidifier, P/N M01AA0101, M01AB0101, M01AB0102 or M01AB0103 is reactivated after the effective date of this Directive accomplish the following: a. Carry out the Requirement 1 functional tests. b. Replace all APU and engine fire shutoff switches that have not been previously replaced in accordance with Requirement 2. Note 2: FAA AD 2005-01-13 Amdt 39-13938 refers.