AD/A330/49 - Equipment/Furnishings - Non Textile Floor (NTF) Replacement (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Airbus Industrie A330 Series Aeroplanes AD/A330/49 Equipment/Furnishings - Non Textile 5/2005 Floor (NTF) Replacement

Applicability: All Airbus A330 aircraft, fitted with Non Textile Floor (NTF) Part Number (PN) 440444-75050BCV, 440458, 440458OK, 440488, 440489, 440497, 440499, 440501, 422225020 NTF "Flight Floor ATS" from vendor Benecke-Kaliko and Gôppinger-Kaliko.

Requirement: Replace, in accordance with procedures described in Airbus AMM 25-28-12/42 PB 401, the NTF of Benecke-Kaliko and Gôppinger-Kaliko, listed above, with NTF for which the composition (NTF top layer plus adhesive plus phenolic laminate) fulfils the applicable requirements.

Note: DGAC AD F-2005-040 and Airbus SIL 25-131 refers.

Compliance: No later than 31 March 2009.

This Airworthiness Directive becomes effective on 12 May 2005.

Background: NTF "flight floor ATS" from vendors Benecke-Kaliko and Gôppinger-Kaliko and installed on some Airbus aircraft at delivery, have initially passed the 12 second vertical burn test in accordance with JAR/FAR §25.853 requirements.

It has been discovered later that the composition as installed in the aircraft (NTF top layer plus adhesive plus phenolic laminate) failed this 12 second vertical burn test.