AD/INST/53 - Shadin ADC-2000 Units (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Instruments and Automatic Pilots AD/INST/53 Shadin ADC-2000 Units 2/2006 DM

Applicability: Shadin ADC-2000 air data computers (ADC), part numbers (P/N) 962830A-1-S-8, 962830A-2-S-8 or 962830A-3-S-8, Configurations B, C and D. Note 1: ADC-2000 ADCs are known to be installed in, but not limited to, the following aircraft: Manufacturer Model

Alliance Aircraft Group, LLC H-250 B-N Group Ltd BN2A Bombardier Inc DHC-3, DHC-6 Cessna Aircraft Company 172, 180, 180E, 185, 206, 206E, 206F, 206G 208, 210L, 310 DHC-2 de Havilland Inc PA-28-180, PA-28-181, PA-31-350, The New Piper Aircraft, Inc PA-32-300, PA-32-301, PA-32R-300, PA-34-200T Requirement: 1. Perform a pre-flight check in accordance with Paragraph E - Interim Procedures of Shadin Service Bulletin SB28–05–002, Rev C, dated 29 June 2005 to ensure the ADC and the Electronic Flight Information System (EFIS) altimetry accuracy (ie the altitudes, altimeter and elevation do not differ by more than 75 feet). Requirement 1 may be performed by pilot, other than a student pilot, endorsed on the type. The requirement to perform a pre-flight check in accordance with this Directive is to be entered on the Maintenance Release in the Maintenance Required Section and compliance is to be certified before each flight. 2. If, as a result of the Requirement 1 check, the required altimetry accuracy is not confirmed, install a placard with letters at least 6mm (0.25 in) high in clear view of the pilot stating: "FLIGHT IN IMC OR UNDER IFR NOT PERMITTED" 3. Return all affected ADCs to the Shadin Repair Facility for upgrade.