AD/A320/67 - MLG Free Fall Extension System (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Airbus Industrie A319, A320 and A321 Series Aeroplanes

AD/A320/67 MLG Free Fall Extension System 6/96

Applicability: Serial numbers 002 to 008, 010 to 014, 016 to 078, 080 to 104, and 106 and 107 with Airbus Industrie SB A320-53-1023 Rev. 6 or earlier Revisions incorporated.

Requirement: Action in accordance with Airbus Industrie AOT 53-08 Rev.1 dated 15 January 1996.

Note: DGAC AD 96-053-077(B) refers.

Compliance: Inspect within 1000 flights after 23 May 1996, and where the minimum clearance between the MLG free fall extension system bellcrank installation and the reinforcement bracket is:

1. greater than 3mm with no interference,

- within 5 years' time in service after 23 May 1996 reinstall the reinforcement brackets in accordance with SB A320-53-1023 Rev. 7;

b. less than 3mm with no interference,

- within 18 months after 23 May 1996 reinstall the reinforcement brackets in accordance with SB A320-53-1023 Rev. 7; or

c. less than 3mm with evidence of interference,

i) prior to further flight reinstall the reinforcement brackets in accordance with SB A320-53-1023 Rev. 7, or

ii) prior to further flight rework the bellcrank lever in accordance with the instructions specified in the Requirement Document, subsequently, and within 5 years' time in service after 23 May 1996, reinstall the reinforcement bracket fasteners in accordance with SB A320-53-1023 Rev. 7.

Full incorporation of Airbus Industrie SB A320-53-1023 Rev. 7 cancels the requirements of this Directive.

Note: AD/A320/47 Amdt 2 cross refers.