Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Gulfstream (Grumman American/ American Aviation) AA-5 Series Aeroplanes
AD/AA-5/9 Rudder Control Bars - Inspection 10/85
Applicability: All models.
Requirement: To confirm that rudder control bars Part No. 601031-501 are correctly welded inspect visually as follows:
1. View both rudder control bars located inside the lower forward fuselage.
2. Inspect weld joints at junction of rudder cable attach arm and rudder control bar. Each joint must have a weld bead at four locations, i.e. fore and aft bottom and fore and aft top.
3. Inspect weld joints at junction of rudder pedal tees and rudder control bar. Each joint must have a weld bead at four locations, i.e. fore and aft bottom and fore and aft top.
4. If inspection reveals missing welds, replacement or repairs to an approved scheme must be incorporated before further flight.
Compliance: Before further flight.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate