Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Avid Flyer Series Aeroplanes
AD/AVID/1 Wing Structural Integrity 12/91
Applicability: All models.
Requirement: Carry out an inspection to ascertain structural integrity of the bonding of wing ribs to front tubular spar, using the following method:
Remove wing tips.
Grasp wing structure at tip with one hand at leading edge and other as far aft as possible, and whilst applying a reasonable torsional load, have an observer noting any abnormal wrinkling of wing fabric covering, between, and at all wing rib stations.
Repeat torsional load in opposite direction and further observe.
Any abnormal wrinkling is to be investigated by removal of fabric from suspect area, before further flight.
Note: The use of a more positive method for attachment of wing ribs to front spar tube, to a scheme approved by the Authority, would be considered terminating action for this Directive.
Compliance: Prior to exceeding 100 hours time in service or 1 year since building, whichever occurs first, and thereafter at intervals not exceeding 100 hours time in service or 12 calendar months whichever occurs first.
Background: Doubt exists as to the durability of the bonding of wing ribs to front spar tube. s
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate