Select any passage to save a personal note with optional tags.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Boeing 747 Series Aeroplanes
AIRWORTHINESS DIRECTIVE
For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
AD/B747/238 Hydraulic Brake Accumulators 13/2000
Applicability: Model 747 series aeroplanes; as listed in Boeing Special Attention Service Bulletin 747-32-2461, dated August 19, 1999.
Requirement: 1. Replace all brake system accumulators which have aluminium end caps with accumulators which have stainless steel end caps in accordance with Boeing Special Attention Service Bulletin 747-32-2461.
2. A Part Number (P/N) BACA11E1 (Parker P/N 2660472-1 or 2660472M1) or BACA11E5 (Parker P/N 2660472-5 or 2660472M5) brake system accumulator must not be installed as a replacement item on an aeroplane applicable to this Airworthiness Directive.
Note: FAA Airworthiness Directive 2000-14-01 Amendment 39-11810 refers.
Compliance: 1. Unless previously accomplished, at the next "C"-check but not to exceed 6000 flight hours from the effective date of this Airworthiness Directive.
2. From the effective date of this Airworthiness Directive.
This Airworthiness Directive becomes effective on 28 December 2000.
Background: There have been ten cases of brake accumulator aluminium end cap fracture that may result in high velocity separation which could cause injury to personnel in the wheel well area, loss of cabin pressurisation, loss of certain hydraulic systems or damage the fuel line of the auxiliary power unit.
Eugene Paul Holzapfel
Delegate of the Civil Aviation Safety Authority 13 November 2000
The above AD is notified in the Commonwealth of Australia Gazette on 22 November 2000