COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section. Boeing 747 Series Aeroplanes AD/B747/292 BS 2360 Aft Pressure Bulkhead Outer Chord Bolts 8/2003 Applicability: Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200F, 747-200C, 747- 300, 747SR, and 747SP series aircraft, with line numbers 1 through 644. Requirement: Action in accordance with the technical requirements of FAA AD 2003-11-25 Amdt 39-13185. Note: Boeing Alert Service Bulletin 747-53A2474 refers. Compliance: As specified in the Requirement document, with a revised effective date of 7 August 2003. This Airworthiness Directive becomes effective on 7 August 2003. Background: This Directive requires identification of all H-11 steel bolts on the outer chord of body station (BS) 2360 aft pressure bulkhead between stingers 12L and 12R; follow- on inspections of all remaining H-11 steel bolts, corrective actions, and eventual replacement of all H-11 steel bolts with Inconel bolts. David Punshon Delegate of the Civil Aviation Safety Authority 27 June 2003 The above AD is notified in the Commonwealth of Australia Gazette on 16 July 2003. Page 1 of 1