AD/B747/309 - Electrical Bonding (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Boeing 747 Series Aeroplanes

AD/B747/309 Electrical Bonding 8/2004

Applicability: Model 747 series aeroplanes with line numbers 1 through 1271 inclusive.

Requirement: 1. Prepare the electrical bonding faying surfaces for the tubing penetrations of the hydraulic heat exchanger on the forward and aft surfaces of the rear spars of the fuel tanks of the left and right wings, together with carrying out a one-time measurement of the electrical bonding resistances between the penetration fittings of the hydraulic heat exchanger and the rear spars; and between the heat exchanger tube and the lower wing stringer surfaces, per the Accomplishment Instructions of ASB 747-29A2104 Revision 1 dated 7 March 2002.

2. If the bonding resistance is incorrect, repeat the preparation of the electrical bonding faying surface for the tubing penetrations of the hydraulic heat exchanger on the forward and aft surfaces of the rear spar of the fuel tanks of the left and right wings as necessary to achieve a bonding resistance below the threshold specified in the Accomplishment Instructions of ASB 747-29A2104 Revision 1.