AD/B767/124 - Wing Front Spar Pitch Load Fittings (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Boeing 767 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/B767/124 Wing Front Spar Pitch Load Fittings 9/2000

Applicability: Model 767 series aircraft, line numbers 1 through 663.

Requirement: Inspect in accordance with the technical requirements of FAA AD 2000-12-17 Amdt 39-11795.

Note: Boeing Service Bulletin 767-57-0053 Revision 2 refers.

Compliance: As specified in the Requirement document for the initial and repetitive inspection requirements, with a revised effective date of 7 September 2000.

Note: Modification of the nacelle strut and wing structure in accordance with Boeing Service Bulletin (SB) 767-54-0080, SB 767-54-0081, or SB 767-54-0082, as applicable, and, accomplishment of the lug bore inspections and insurance cut of the pitch load fitting in accordance with SB 767-57-0053 Revision 2; constitutes terminating action for the inspection requirements of this Directive.

This Airworthiness Directive becomes effective on 7 September 2000.