AD/B767/85 Amdt 4 - MLG Outer Cylinder Aft Trunnion (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B767/85 Amdt 3 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Boeing 767 Series Aeroplanes

AD/B767/85 Amdt 4

MLG Outer Cylinder Aft Trunnion 4/2002

Applicability: Model 767 series aircraft with line numbers 001 through 605, on which the terminating action required by paragraph (e) of the Requirement 3 document has not been accomplished.

Requirement: 1. Action in accordance with the technical requirements of FAA AD T95-20-51.

2. Action in accordance with the technical requirements of FAA AD 95-19-10 Amdt 39-9372.

3. Action in accordance with the technical requirements of FAA AD 2002-01-13 Amdt 39-12607.

Note 1: Compliance with the requirements of Boeing Service Bulletin 767-32A0148 Revision 2, dated 30 November 2000, constitutes terminating action for the inspection requirements of this Directive.

Note 2: Compliance in accordance with "Part 4-Terminating Action" of the Accomplishment Instructions of Boeing Alert Service Bulletin 767-32A0192, dated 31 May 2001, constitutes terminating action for the inspection requirements of this Directive.

Compliance: For Requirement 1: As specified in the Requirement Document with the initial inspection to be performed before 30 September 1995; until commencement of compliance with Requirement 3.