Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Hot Air Balloons
AD/BAL/10 Wire Rope Vent and Rip Lines 7/90
Applicability: All hot air balloons.
Requirement: 1. Gain access to the lower section of the rip and vent control lines.
2. Examine the lower 7 metres for evidence of wire rope.
3. If wire rope is found replace affected lines with same diameter kevlar core polyester covered line or other suitable non-conductive alternative.
Note: Kavanagh Balloons Engineering Order KB / 90 / 03 provides a suitable means of compliance.
Compliance: Prior to 31 December 1990.
Background: To reduce potential electrical shock hazards to the pilot and passengers, all metal control lines are replaced with non-conductive control lines.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate