AD/BEECH 1900/18 Amdt 2 - Outboard Flap Attachment Brackets and Aft Roller Bearings (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Beechcraft 1900 Series Aeroplanes

AD/BEECH 1900/18 Amdt 2

Outboard Flap Attachment Brackets and Aft Roller Bearings

3/99

Applicability: Models Serial Numbers

1900 UA-1, UA-2, and UA-3

1900C UB-1 through UB-74, and UC-1 through UC-174

1900C (C-12J) UD-1 through UD-6

1900D UE-1 through UE-322

Requirement: Inspect the outboard flap attachment brackets and roller bearings on both wings for visible wear and elongation of the bracket holes in accordance with the Accomplishment Instructions section of Raytheon Aircraft Safety Communique No. 137, Revision 1.

Repair or replace any worn or damaged part in accordance with Raytheon Aircraft Temporary Revision No. 57-1 to the Raytheon Aircraft Beech 1900 Airliner Series Structural Repair Manual part number 114-590021-9B6 dated May 16 1997; Reissued June 30 1992.

Note 1: FAA AD 99-01-03 Amdt 39-10970 refers.

Note 2: Raytheon Aircraft Beech Mandatory Service Bulletin (MSB) 27-3158, issued July 1998, installs improved outboard flap support roller bearings and is an alternate means of compliance with this Directive, relieving the flap inspection intervals.

Compliance: Upon the accumulation of 600 total flight cycles, or within 600 flight cycles from the date of the last inspection required by the previous issue of this Directive, or within the next 100 flight cycles after 25 March 1999, whichever occurs later; thereafter at intervals not to exceed 600 flight cycles; until compliance with MSB 27-3158.

This Amendment becomes effective on 25 March 1999.