Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Beechcraft 200 (Super King Air) Series Aeroplanes
AD/BEECH 200/52 Engine Mount Assembly Attachment Bolts 10/92
Applicability: Models and serial numbers as listed in Beech SB 2432.
Requirement: 1. Individually remove each engine truss-to-firewall bolt and determine whether the bolt is manufactured by Dumont Aviation as specified by Figure 2 of, and in accordance with paragraphs 1 and 2 of the ACCOMPLISHMENT INSTRUCTIONS section of Beech SB 2432. Only one engine truss-to-firewall bolt shall be removed at any given time.
2. Replace any bolt manufactured by Dumont Aviation as identified in Requirement 1 of this Directive with a new bolt part number MS20006-20 /M/.
Note: FAA AD 92-15-01 Amdt 39-8294 refers.
Compliance: 1. Within 150 hours time in service after 17 September 1992.
2. Prior to further flight.
Background: This Directive requires a one-time visual inspection of all engine mount assembly attachment bolts to determine whether bolts that could have been improperly heat treated are installed, and replacement of any such bolts.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate