AD/BEECH 33/43 - KA-33 Cooling Blower (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Beechcraft 33 and 35-33 (Debonair/Bonanza) Series Aeroplanes

AD/BEECH 33/43 KA-33 Cooling Blower 8/2001

Applicability: Beech Model F33A aeroplanes, serial numbers CE-1050 through CE-1791 inclusive. Requirement: 1. Inspect the aeroplane in accordance with Part I of the Accomplishment Instructions of Raytheon Mandatory Service Bulletin SB 34-3267, issued March 1999, to verify whether a KA-33 avionics cooling blower system is installed and operating correctly.

2. If the Requirement 1 inspection confirms that a KA-33 cooling blower is fitted, install a one ampere circuit breaker, part number 7277-2-1, in place of the factory installed three ampere or five ampere circuit breakers in accordance with Part II of the Accomplishment Instructions of SB 34-3267.

3. Three ampere or five ampere circuit breakers must not be installed on any aeroplane to protect the KA-33 cooling blower.

Note: FAA AD 2001-11-03 Amdt 39-12244 refers.

Compliance: For Requirement 1 - Within the next 600 hours time-in-service after the effective date of this Directive or the next six calendar months after the effective date of this Directive, whichever occurs first.