AD/BEECH 55/86 - Magnesium Metal Bonded Elevator Assembly (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Beechcraft 55, 58 and 95-55 (Baron) Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/BEECH 55/86 Magnesium Metal Bonded Elevator Assembly

Applicability: Model Serial Number

13/2000

95-A55 TC-191 through TC-349, TC-351 through TC-370, TC-372 through TC- 501

95-B55 TC-371 and TC-502 through TC-2406

95-C55 TC-350, TE-1 through TE-49, and TE-51 through TE-451 D55 TE-452 through TE-767 E55 TE-768 through TE-1201

58 TH-1 through TH-1930

58P TJ-3 through TJ-435, and TJ-437 through TJ-443 58TC TK-1 through TK-150 Requirement: Action in accordance with Raytheon Aircraft Mandatory Service Bulletin 27-3396, Issued May 2000, Revised June 2000.

Note: FAA AD 2000-18-02 Amdt 39-11887 refers.

Compliance: Accomplish, before 28 January 2001, the check to determine whether an affected elevator skin assembly is installed. Replace, before further flight, any elevator skin assembly found to be affected.