Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Beechcraft 99 Series Aeroplanes
AD/BEECH 99/5 MLG Drag Leg Lock Link Roll Pin 6/96
Applicability: Models 99, 99A, A99A, B99, and C99, with serial numbers U-1 through U-239.
Requirement: Inspect the main landing gear drag leg lock link to ensure that the hole for the roll pin is drilled completely through both walls of the link, in accordance with the Accomplishment Instructions section of Beech Service Bulletin 2607, Revision 1.
Replace any drag leg lock link that does not have the roll pin hole drilled through both walls of the link. Accomplish this replacement in accordance with the maintenance manual.
Note: FAA AD 96-03-13 Amdt 39-9510 refers.
Compliance: Within 100 hours' time in service after 23 May 1996.
Background: The FAA received a report of an incident in which a main landing gear collapse had occurred. An investigation revealed that the roll pin hole was not completely drilled through both walls of the drag leg lock link.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate