AD/BELL 212/62 - Tail Rotor Counterweight Bellcrank Retention Nut (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Bell Helicopter Textron 212 Series Helicopters

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/BELL 212/62 Tail Rotor Counterweight Bellcrank Retention Nut

9/2001 DM

Applicability: Model 212 helicopters.

Requirement: 1. Remove the two existing retention nuts retaining the bellcranks, part number 212- 010-709-001 or 212-011-705-001, and install retention nuts, part number MS14145L6 or MS17826-6, in accordance with paragraphs (1) through (5) of the Accomplishment Instructions in Bell Helicopter Textron Alert Service Bulletin (ASB) 212-00-107 Revision A, dated 13 September 2000. A used retention nut must not be installed.

2. Inspect the retention nuts and corrosion preventive compound (CPC) coating in accordance with paragraph (6) of the Accomplishment Instructions in ASB 212- 00-107 Revision A. Reapply the CPC coating if deficiencies are found in the coverage and protection of the area. Replace any retention nut found with any corrosion, mechanical damage, a crack, or looseness, with a serviceable nut before further flight.