AD/BN-2/51 Amdt 3 - Main Landing Gear Upper Torque Link Attachment Lug (Cth)
Federal Register of Legislation
Full text
Select any passage to save a personal note with optional tags.
AIRWORTHINESS DIRECTIVE
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/BN-2/51 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Pilatus Britten-Norman BN-2 Series Aeroplanes
AD/BN-2/51
Amdt 3
Main Landing Gear Upper Torque Link Attachment Lug
10/2002
Applicability: All BN2, BN2A, BN2B, and BN2T Series Islander aircraft.
Requirement: 1. Inspect in accordance with FHL Service Bulletin 32-4 Issue 5, Revision 2, dated 15 June 2002.
2. Replace Main Undercarriage Assembly Part Number 3499H1 with Assembly Part Number 3499H2, in accordance with FHL Service Bulletin (SB) 32-4 Issue 5, SB 32-4 Issue 5 Revision 1, or SB 32-4 Issue 5 Revision 2.
Note: B-N Group Ltd Mandatory Service Bulletin SB 170 Issue 6 refers.
Compliance: 1. As specified in the Requirement document.
2. Within 1,000 landings after 9 January 2002, or before 30 September 2002, whichever occurs first.
The compliance times remain unchanged by this issue. This Amendment becomes effe ctive on 3 October 2002.
Background: There have been occurrences of main leg cylinders exhibiting fatigue cracks at the torque link lugs, which could result in detachment of the torque links under subsequent heavy static loads. In addition, a recent occurrence of detachment of the torque link showed no such evidence of cracking prior to failure under heavy static load.
Amendment 3 is issued in response to a revision of the Requirement document, which corrects Figure 7 part numbers.
Pilatus Britten-Norman BN-2 Series Aeroplanes
AD/BN-2/51 Amdt 3 (continued)
Amendment 2 of this Airworthiness Directive became effective on 24 January 2002. Amendment 1 of this Airworthiness Directive became effective on 31 August 1986. The original issue of this Airworthiness Directive became effective on 31 July 1985.
David Alan Villiers
Delegate of the Civil Aviation Safety Authority 22 August 2002
The above AD is notified in the Commonwealth of Australia Gazette on 11 September 2002.