Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Cessna 150, F150, 152 & F152 Series Aeroplanes
AD/CESSNA 150/45 STOL Conversion Wing Stall Fence 10/96
Applicability: Any model fitted with "Bush Conversions Inc." Short Take Off and Landing (STOL) kit installed in accordance with FAA STC SA1371SW.
Requirement: Measure the height of the wing stall fence at the trailing edge. If the height exceeds 32.5 mm (1.28 inches) install a smaller fence in accordance with a scheme approved pursuant to CAR35 through a District Office of the Authority.
Note 1. FAA AD 96-12-23 refers.
Note 2. The diagram below is extracted from the FAA AD for guidance.
Compliance: Within 100 hours time in service after 12 September 1996.
Background: This Directive is issued to prevent modified aircraft from entering a stall condition due to excessive stall fence height, which could result in loss of control of the aircraft.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate