AD/CESSNA 185/46 - Fuel Strainer (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Cessna 185 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/CESSNA 185/46 Fuel Strainer 7/2000

Applicability: Models 185D, 185E, A185E and A185F series aircraft.

Requirement: 1. Inspect aircraft fuel strainer assembly. If P/N 0756005-2 top assembly, P/N 0756005-8 or 0756005-9 fuel strainer assembly were shipped from Cessna between December 12, 1996 and September 5, 1997, and fitted to the aircraft, measure the standby pipe in the fuel strainer assembly for a visible maximum length not exceeding 1.68 inches, in accordance with the Accomplishment Instructions of Cessna Single Engine Service Bulletin SEB97-9 dated November 17, 1997.

The holder of a pilot licence, other than a student pilot, valid for the aircraft type, may review the aircraft records to determine if parts listed in this Directive have been fitted to the aircraft. If this review concludes that parts listed in this Directive have not been fitted then a certification stating that "This Directive does not apply as no parts listed in the Cessna SEB97-9 have been fitted to this aircraft." may be entered in the aircraft records.