Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Partenavia P68 Series Aeroplanes
AD/P68/25 Aileron Control Chain Connector - Inspection and Modification
Applicability: All model P68 series up to S/n 335. Requirement: Partenavia P68 S.B. No. 64 Rev. 1. Note: RAI AD 84-146/P68-32 Refers.
Compliance: Inspect and modify before further flight after 1 November 1984.
12/84 TX
Note: A one time only inspection to determine the security of the chain connector circlip may be performed to permit return to a maintenance base. This inspection may be accomplished by the pilot in command. Access to the chain can be gained through the fuselage access panels No. 21. The pilot shall make an entry in the maintenance release certifying that the inspection has been accomplished.
Background: The manufacturer has received reports of the loss of security of retention of the chain connector safety lock (circlip) P/N 68-5.2017-3.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate