Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Piper PA-30 & 39 (Twin Comanche) Series Aeroplanes
AD/PA-30/32 Flap Extension Limitation - Warning Placard 6/83
Applicability: Models PA-30, PA-39 series which have been modified in accordance with FAA Supplemental Type Certificate SA2312WE (Robertson STOL modification kit).
Requirement: 1. To prevent possible loss of aeroplane control due to an asymmetric flap extension or retraction, install a placard on the panel near the flap actuator which reads:
"DO NOT EXTEND FLAPS BEYOND 15 DEGREES (TAKEOFF POSITION)".
2. The placard may be removed when a positive flap retraction system is installed in accordance with Robertson Aircraft Corporation Service Bulletin 19 dated 22 October 1982.
Note: FAA AD 82-23-01 refers.
Compliance: Within 25 hours time in service after 16 May 1983.
Background: An accident investigation has shown that a loss of aeroplane lateral control can occur if an asymmetric flap condition is allowed to develop, in subject aircraft fitted with the Robertson STOL modification kit. A Robertson Service Bulletin has been issued in order to overcome the problem.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate