AD/PA-32/80 - Flap Handle Attach Bolt (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Piper PA-32 (Cherokee Six) Series Aeroplanes

AD/PA-32/80 Flap Handle Attach Bolt 9/96

Applicability: PA32-260 32-1 through 32-1297 and 32-7100001 through 32-7800008

PA32-300 32-40000 through 32-40974 and 32-7140001 through 32-7940290

PA32-301 32-8006001 through 32-8406020

P32-301T 32-8024001 through 32-8424002

PA32R-300 32R-7680001 through 32R-7880068 PA32RT-300 32R-7885001 through 32R-7985105 PA32RT-300T 32R-7887001 through 32R-7987126 PA32R-301 32R-8013001 through 32R-8413024 PA32R-301T 32R-8029001 through 32R-8429028 Requirement: (a) Measure the cable mounting attach hole diameter and enlarge the hole to .316 of an inch diameter. If the diameter of the cable mount attach hole is larger than .316 of an inch, replace the flap lever handle (refer to the illustrated parts catalogue for the part number), in accordance with the Instructions section of Piper SB 965.

(b) Install a new bushing (using only Piper part number (P/N) 63900-174) into the cable mounting attach hole, in accordance with the Instructions section of Piper SB 965.

(c) Replace the flap lever handle attach bolt with a new clevis bolt (Piper P/N 400 673 or standard P/N AN23-11) in accordance with the Instructions section of Piper SB 965.

(d) Inspect the washer, nut, and cotter pin, and if damaged, replace washer (Piper P/N 407-564 or standard P/N AN960-10), nut (Piper P/N 404-392 or standard P/N AN320-3), and cotter pin (Piper P/N 424-051 or standard P/N MS24665- 132) in accordance with the Instructions section of Piper SB 965.