Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Piper PA-36 (Pawnee Brave) Series Aeroplanes
AD/PA-36/9 Control System Torque Tube Front Bearing Plate Attachment Bolt - Inspection
Applicability: All models PA-36-285 with S/Nos. 36-7560001 to 36-7560121.
12/75
Requirement: To determine proper installation of the front bearing plate bolt on the control system torque tube accomplish the following:
1. Remove fuselage belly panel directly beneath the pilot seat.
2. Refer to figure 5-1, sketch A of PA-36 Service Manual and locate front bearing plate to torque tube attachment bolt.
3. Ensure bolt (item 14) is tight and exhibits proper thread engagement in barrel nut (visible through aperture in torque tube): a minimum of 1 1/2 threads should be visible.
4. If proper thread engagement is not found, remove forward bolt (item 14) and install proper length bolt (AN4-13A or equivalent).
5. Recheck controls for proper operation; or FAA AD 75-20-07 Amendment 39-2373. Compliance: Within 10 hours time in service after 31 October 1975.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate