Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Propellers - Variable Pitch - Flottorp
AD/PFT/1 Model FS200-1 Propeller Spinners - Replacement of Bolts
8/84
Applicability: All Flottorp F12A-3 and F12A-5 series propellers fitted with F200-1 spinners.
Requirement: 1. Remove the six AN4H-7A bolts attaching the 248-1 spinner bulkhead to the propeller flange and re-install six shorter AN4H-6A bolts. The old AN960-416L washers may be re-used.
2. Torque bolts to 70 to 90 inch pounds. Safety wire all bolt heads with MS20995- C32 safety wire.
or FAA AD 64-7-3.
Compliance: Forthwith.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate