Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Transavia PL 12 Series Aeroplanes
AD/PL 12/8 Amdt 3
Applicability: All models.
Stub Wing Spar 7/90 DM
Requirement: Carry out detailed visual inspection of the complete stub wing main spar for corrosion and cracking paying particular attention to the areas adjacent to the fish plates welded to the rear face of the spar web at the fuselage sides, right angle stiffener, inboard of MLG pylons and all other welds in the spar web. The inspection is to be performed after removal of the lower cowl and access panels. The use of a strong light source and sight aid is recommended. Any cracks found are to be repaired, corrosion to be removed, area blended, checked within limits, repaired as required and reprotected before further flight.
Compliance: At the next scheduled inspection for issue of a Maintenance Release after 25 April 1990, and thereafter at intervals not exceeding 100 hours time in service.
Background: Amendment 3 has been issued to require further inspection of stub wing spar as a result of severe corrosion and cracking being reported in the area inboard of MLG.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate