Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Propellers - Variable Pitch - Sensenich Series
AD/PSN/1 Blade and Hub - Inspection 8/84
Applicability: All controllable and constant speed propeller Models C-2FM, CS-2FM, C-3FR4, CS- 3FR5 and CS-3FM4.
Requirement: 1. Remove the propeller blades from the hub and carefully inspect the wood blade shank and split retaining groove in the blade ferrule for cracks, check and tighten the lag screws to 160 inch pounds.
2. Magnetically inspect the ferrule and all ferrous parts of the hub. Special care should be given to the inspection for cracks originating in the hub ring groove; or
Sensenich SB No. 113, Rev. 1 and Rev. R9; or FAA AD 63-19-4. Compliance: Propellers installed on Lycoming 0-235-C or 0-290-D series or Franklin 6A4-165-B3 engines - At intervals not exceeding 100 hours time in service. Propellers installed on engines not listed above - At intervals not exceeding 300 hours time in service.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate