Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Bell UH-1 Series Helicopters
AD/UH-1/2 Tail Rotor Slider 4/97 DM
Applicability: All models.
Requirement: Measure the outside diameter of the splined shaft (barrel) of the slider Part Number 204-010-720-3, or Part Number 204-010-720-003 at two points that are 90 apart on the outside circumference, at ½" to 1" from either end of the slider. Replace any slider which measures less than 1.300".
Note: FAA AD 97-01-06 refers.
Compliance: Within 5 hours time in service after 12 February 1997.
Background: US Army "Breakout" spares of this item have been discovered with less than the minimum wall thickness. This Directive is to prevent a possible fatigue failure of a defective slider which would result in the loss of the tail rotor.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate