AD/UH-1/5 Amdt 2 - Tailboom Vertical Fin Spar (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Bell UH-1 Series Helicopters

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/UH-1/5 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/UH-1/5 Amdt 2

Tailboom Vertical Fin Spar 1/2001 TX

Applicability: All UH1 Series, and UH1 derivatives with the USA FAA Type Certificate Data sheets (TCDS) listed in the Requirement document.

Requirement: Action in accordance with the technical requirements of FAA AD 99-25-12 Amdt 39-11455.

Note: Replacement of the vertical fin spar in accordance with the Requirement document constitutes terminating action for the requirements of this Directive.

Compliance: As specified in the Requirement document with a revised effective date of 20 November 2000.

This Amendment becomes effective on 20 November 2000.

Background: Following accident investigations, the FAA determined that a large number of high power events can cause fatigue cracking which will result in failure of the vertical fin spar, which in turn will result in loss of control of the helicopter.