Airworthiness Directives 2004 - Revocation and Remaking - Fuji FA-200 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety Authority, acting under subregulation 39.001 (1) of the Civil Aviation Safety Regulations 1998:

(a) revoke the Airworthiness Directives mentioned in Schedule 1; and

(b) make, as separate instruments, each Airworthiness Directive mentioned in Schedule 1 and attached.

David Villiers Delegate of the Civil Aviation Safety Authority

20 December 2004

Note: Each attached Airworthiness Directive is being re-made in exactly the same form as appears in the latest published edition of the Directive.

Schedule 1 Revocation and Remaking of Airworthiness Directives

Fuji FA-200 Series Aeroplanes

AD Name AD Number

Battery Leads - Identification and Relocation AD/FA-200/1

Nose Landing Gear Piston Stop Plate and Screws - Modification AD/FA-200/2

Propeller Blade Inspection and Operating Restriction AD/FA-200/3

Main Fuel Tank Vent - Modification AD/FA-200/4

Fuselage Skin - Modification AD/FA-200/5

Superseded by AD/FA-200/10 AD/FA-200/6

Rudder Cables - Inspection and Modification AD/FA-200/7

Pitot Static Water Drain Access - Modification AD/FA-200/8

Engine Driven Fuel Pump Outlet Tee - Replacement AD/FA-200/9 Amdt 1

Oil Cooler Lines - Modification AD/FA-200/10

Parking Brake Control Cable - Inspection AD/FA-200/11

Auxiliary Fuel Pump - Modification AD/FA-200/12

Spin Recovery Placard - Replacement AD/FA-200/13

Main Landing Gear Assemblies - Modification AD/FA-200/14

Nose Landing Gear Piston Stop Plate Screws - Modification AD/FA-200/15

Front Seat Restraint Installation - Modification AD/FA-200/16

robatic Fatigue Life Limitation AD/FA-200/17 Amdt 1

Fuel System - Placard Installation AD/FA-200/18

Rudder Pedal System AD/FA-200/19 Amdt 2

Fuselage Rear Bulkhead - Inspection AD/FA-200/20

Teijin Seiki Fuel Strainer P/N Fif-40000 - Inspection and Modification AD/FA-200/21