AD/CESSNA 210/56 Amdt 1 - Fuel Filler Caps and Adaptors (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Cessna 210 Series Aeroplanes

AD/CESSNA 210/56 Amdt 1

Fuel Filler Caps and Adaptors 11/88

Applicability: Models with serial numbers: 21057001 through 21058818 (1960-1966) T210-0001 through T210-0197 (1966); unless reduced diameter, raised filler neck fuel caps are installed on all filler openings in accordance with Cessna Service Kit SK182-85 (refer S.I.L SE 84-16).

Requirement: 1. Visually inspect the wing aft of the fuel filler for indications of inflight fuel leakage.

2. Visually inspect the fuel cap locking mechanism and seals for cracking, distortion and any condition which might prevent sealing.

3. Remove the fuel filler caps and inspect the adaptor sealing face for distortion, scratches, corrosion or any condition which may prevent the cap from sealing.

4. Visually check the sealing and security of the attachment of the adaptor flange to the adaptor plate paying particular attention to the adhesive (if present) between the parts.

5. Check the fuel cap seal by actuating the locking tab and noting that force is maintained between the cap, seal and adaptor when the tab is in the over-centre locking position.

6. Conduct a fuel cap leak test in accordance with Cessna SIL SE 82-34.

Compliance: Prior to the issue of the next Maintenance Release after 30 June 1985 and thereafter at each issue of a new Maintenance Release.

Background: This Amendment deletes the requirement for extensive inspection and testing of fuel filler caps against possible water ingress, for aeroplanes fitted with raised fuel filler necks.