Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Cessna 320 Series Aeroplanes
AD/CESSNA 320/23 Main Landing Gear Attachment - Inspection
Applicability: All models 320 to 320D inclusive. Requirement: With aeroplane on jacks: 1. Remove Main Landing Gear Attaching "U" Bolts and Shafts.
8/75
2. Visually inspect the "U" Bolts, with the aid of a 10X glass, in the area of the thread root ends for cracks.
3. Visually inspect the Attaching Shafts, with the aid of a 10X glass, in the area of the roll pin hole for cracks.
Compliance: 1. For MLG attachment shafts and "U" bolts which have achieved 2500 hours at 12 August 1975; within 100 hours time in service and thereafter at intervals not exceeding 200 hours time in service.
2. All other MLG attachment shafts and "U" bolts; before achieving 2500 hours time in service and thereafter at intervals not exceeding 200 hours time in service.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate