AD/CESSNA 337/21 Amdt 1 - Pre-Certification Requirements - Modification (Cth)

Federal Register of Legislation

Document text

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Cessna 337 Series Aeroplanes

AD/CESSNA 337/21 Amdt 1

Pre-Certification Requirements - Modification 8/75

Applicability: All model 337G.

Requirement: Modify the aircraft in accordance with the requirements of ANO 101.22 in respect of the following:

1. a. Install placards clearly visible to the occupants of seat rows 1 and 2 specifying the periods during which smoking is prohibited.

Install a "NO SMOKING" placard clearly visible to the occupant/s of seat row 3.

2. Install and identify:

fuelling equipment bonding points at each fuel filling point.

external earthing points for the attachment of ground connections on each main undercarriage assembly or on the nose gear.

3. a. Modify the second row seat backrest locking pin P/No. 1514201-18 to permit the backrest to be pushed forward by the occupant/s of the third row seats when applying a forward force of 18 lb. to 22 lb. at the top of the backrest, to a scheme approved by the Secretary.

Note: Modification to ARCAV ALBURY drawing No. 20 issue 2 or Rex Aviation Ltd. Drawing No. RA-A-1390-1 is an acceptable means of compliance.

Install a placard on the rear of each second row seat backrest, clearly visible to the occupant/s of the third row seats, as follows:

IN EMERGENCY

PUSH CENTRE SEAT BACKREST FORWARD

Note: All lettering shall be in white on a black back- ground. Underlined lettering shall be a minimum of 6 mm (1/4") high and other lettering shall be a minimum of 3 mm (1/8") high.

4. Install an easily readable placard in a prominent position on the pilot"s instrument panel as follows:

Read full text →

Official source

We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.

Not checked yet

Last checked with source on —

Open official source

Checking whether the official page can be embedded…

Study brief

Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.

Unknown

No study brief is cached for this law yet. Sign up to generate a plain-English brief.

You've got 21 of 22 free Acts left this visit. Sign up anytime for Facts, Related, and study briefs too.

Document text

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Cessna 337 Series Aeroplanes

AD/CESSNA 337/21 Amdt 1

Pre-Certification Requirements - Modification 8/75

Applicability: All model 337G.

Requirement: Modify the aircraft in accordance with the requirements of ANO 101.22 in respect of the following:

1. a. Install placards clearly visible to the occupants of seat rows 1 and 2 specifying the periods during which smoking is prohibited.

Install a "NO SMOKING" placard clearly visible to the occupant/s of seat row 3.

2. Install and identify:

fuelling equipment bonding points at each fuel filling point.

external earthing points for the attachment of ground connections on each main undercarriage assembly or on the nose gear.

Note: Modification to ARCAV ALBURY drawing No. 20 issue 2 or Rex Aviation Ltd. Drawing No. RA-A-1390-1 is an acceptable means of compliance.

Install a placard on the rear of each second row seat backrest, clearly visible to the occupant/s of the third row seats, as follows:

IN EMERGENCY

PUSH CENTRE SEAT BACKREST FORWARD

Note: All lettering shall be in white on a black back- ground. Underlined lettering shall be a minimum of 6 mm (1/4") high and other lettering shall be a minimum of 3 mm (1/8") high.

4. Install an easily readable placard in a prominent position on the pilot"s instrument panel as follows:

Read full text →