AD/CESSNA 400/112 Amdt 1 - Fuel Boost Pump Wiring (Cth)

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/CESSNA 400/112 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Cessna 400 Series Aeroplanes

AD/CESSNA 400/112 Amdt 1

Fuel Boost Pump Wiring 11/2003 DM

Applicability: Model 441 aeroplanes, serial numbers 0001 through 0362 and 0698.

Requirement: 1. Inspect part number (P/N) 5718106-1 wire harnesses and fuel boost pump lead wires for chafing or damage in accordance with Cessna Conquest Service Bulletin (SB) CQB02-1 Revision 2, dated 7 October 2002.

Note 1: Prior accomplishment of the first or initial Requirement 1 inspection in accordance with SB CQB02-1R1 Revision 1 dated 22 April 2002, as specified in the original issue of AD/CESSNA 400/111, is considered acceptable for the first or initial inspection required by this Directive.

2. If any wire harness P/N 5718106-1 is found chafed or damaged during the Requirement 1 inspections, replace the wire harness with wire harness P/N 5718106-6 in accordance with SB CQB02-1, Revision 2.

3. If any fuel boost pump lead wires are found chafed or damaged during the Requirement 1 inspections either repair and protect the fuel pump leads or replace the fuel boost pump in accordance with SB CQB02-1, Revision 2.