AD/CESSNA 525/2 - Direct Current Power Battery Switch (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Cessna 525 Series Aeroplanes

AD/CESSNA 525/2 Direct Current Power Battery Switch 4/2001 DM

Applicability: Model 525 (CitationJet 1) aeroplanes, serial numbers 525-0360 through 525-0400, that incorporate a direct current (DC) power battery switch, Eaton Part Number (P/N) A3-205-01/P.

Requirement: 1. Inspect the aeroplane to determine whether a DC power battery switch, Eaton P/N A3-205-01/P, with a manufacturer's date code of 9926 through 0039, is installed. If the affected DC power switch is not installed further action is not required.

2. If, as a result of the Requirement 1 inspection, one of the affected DC power battery switches is found to be installed, or the switch cannot be positively identified as not being one of the affected types, replace the switch in accordance with the Accomplishment Instructions section of Cessna Service Bulletin SB525- 24-20, dated 16 November 2000, with a new switch of the same part number that has a manufacturer's date code of 0040 or later.

3. DC power battery switches, Eaton P/N A3-205-01/P with a manufacturer's date code of 9926 through 0039 may not be installed on any aeroplane as a replacement part.