Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
General Electric Turbine Engines - CF6 Series
AD/CF6/19 High Pressure Compressor Rotor Inertia Weld 9/91
Applicability: CF6 -80A and 80C2.
Requirement: Action in accordance with the Technical Requirements of FAA AD 91-11-05, Amendment 39-7001.
Note: GE Service Bulletins 72-531 Revision 2 and 72-314 Revision 2 refer.
Compliance: As specified in the Requirement Document with a revised effective date of 5 September 1991 for Australian registered aircraft.
Background: The FAA AD has been prompted by two high pressure compressor rotor stages 11-14 spool-shaft failures at the inertia weld. Failure of the weld in service will result in major power loss and it could be uncontained.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate