AD/EMB-110/31 Amdt 7 - Cracking of Horizontal Stabiliser Attachment Fittings (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/EMB- 110/31 Amdt 6 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Embraer EMB-110 (Bandeirante) Series Aeroplanes

AD/EMB-110/31 Amdt 7

Cracking of Horizontal Stabiliser Attachment Fittings

6/2003

Applicability: All models of EMB-110 Bandeirante with components listed in the Requirement Document, with more than 5000 hours time in service, or in excess of two years since manufacture.

Requirement: 1. Replace the horizontal stabiliser attachment fittings in accordance with Embraer SB 110-053-0022 Revision 4; as listed in the Table 1 "Old P/N" and "Replacement P/N" columns of the Service Bulletin.

2. Carry out an inspection of horizontal stabiliser attachment fittings as specified by, and in accordance with, Embraer SB 110-053-0022 Revision 4.

Note: Brazil CTA AD 84-04-01 R6 refers.

Compliance: 1. Unless already accomplished; within 900 hours time in service or 6 months after accomplishment of the last inspection required by the previous issue of this Directive or within 900 hours time in service or six months after 12 December 1991, whichever occurs first.