AD/GAF-N22/65 Amdt 3 - Rear Fuselage Frame (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

GAF N22 and N24 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/GAF-N22/65 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/GAF-N22/65 Amdt 3

Rear Fuselage Frame 6/2000

Applicability: All model N22 and N24 aircraft which have NOT been modified in accordance with ASTA Modification N806.

Requirement: 1. Inspect the forward face of the rear fuselage frame for cracks in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.A, (Part 1 - Inspection).

2. Modify the aircraft by installing ASTA Modification N806 in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.C, (Part 3 - Mod N806 Incorporation).

Note: ANMD-53-15 Revision 3 describes the same inspection as that required by previous amendments to this AD.

Compliance: For Requirement Para 1: As detailed in the Requirement Document Para 1.D.(2).

For Requirement Para 2: As detailed in the Requirement Document Para 1.D.(4). Aircraft which have already exceeded the applicable compliance time must be modified within 12 months time in service after 15 June 2000.