Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Hiller UH-12 Series Helicopters
AD/HILLER 12/27 Amdt 2
Outer Gimbal Forward Attach Fitting - Inspection
12/84 TX
Applicability: All models UH-12D and UH-12E series which have been converted to turbine power by STC SH177WE or SH 178WE.
Requirement: 1. Remove the paint from the outer gimbal forward attach fitting of the Hiller Engine Mount P/No. 63181-5.
2. Using a dye penetrant or a magnetic particle inspection technique, inspect the gusset weld beads for cracks on both the front and rear sides of the gusset.
Note: FAA AD B4-19-08 refers.
Compliance: 1. Within 20 hours' time in service after 06 November 1984 and thereafter at intervals not exceeding 600 hours' time in service.
2. Upon installation or reinstallation of engine mount assy P/N 63181-5.
Background: A recent overseas accident resulted from fatigue failure of the outer gimbal forward attach fitting. This directive has been amended to include repetitive inspections of the attach fitting.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate