AD/HOSE/6 - Hose Recall #2 - Buckeye Rubber Products (Cth)

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Hose Assemblies

AD/HOSE/6 Hose Recall #2 - Buckeye Rubber Products 11/98

Applicability: All ½ inch to 3 inch diameter MIL-H-6000B rubber aircraft fuel system hose manufactured by Buckeye Rubber Products Inc (a US company) since 01 January 1994. These hoses may be fitted to Raytheon (formerly Beechcraft) 90, 100, 200 and 300 series airplanes (all models).

Requirement: 1 Replace all applicable fuel hoses which are identified as having been supplied and/or replaced between 01 January 1994 and 8 October 1998 (the effective date of this AD) in accordance with the directions of Raytheon Service Bulletin 2718 Rev 1 dated 01 June 1997.

The hoses are identified by a spiral or diagonal pattern external reinforcement wrap (Fig 1), a pronounced 3/8 inch wide lengthwise red-orange stripe on one side with the manufacturer's code, 94519, printed periodically in red letters on one side, and/or on the other side by two faint parallel white lines showing quarter year and year of manufacture, hose size and specification number.

2. MIL-H-6000 rubber hose manufactured by Buckeye Rubber Products since 01 January 1994 shall not be installed on an Australian registered aircraft.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Note: FAA AD 9815-13 Amendment 39-10664 effective 28 August 1998 refers.

Compliance: 1. Within 200 flight hours or six months of the effective date of this Directive.

2. As of the effective date of this Directive.

This Airworthiness Directive becomes effective on 8 October 1998.