AD/HS 125/170 - Wing and Fuselage Attachment Bolts (Cth)

AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

British Aerospace BAe 125 Series Aeroplanes

AD/HS 125/170 Wing and Fuselage Attachment Bolts 7/2003

Applicability: Model Hawker 800XP and 800 aircraft, with serial numbers 258287 through 258390; excluding serial numbers 258289, 258291, 258292, 258293, 258294, 258295, 258301, 258303, 258310, 258312, 258313, 258315, 258321, 258336, and 258343.

Requirement: 1. For Model Hawker 800XP aircraft identified in effectivity of Raytheon Service Bulletin SB 51-3408, dated October 2000, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin.

2. For Model Hawker 800XP aircraft identified in effectivity of Raytheon Service Bulletin SB 51-3426, Revision 1, dated November 2001, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, is acceptable for compliance with the inspection requirements only for those locations identified in the original service bulletin; Revision 1 requires inspections at additional locations.