Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Consolidated Aeronautics, Colonial and LA-4 Series Aeroplanes
AD/LA-4/1 Nose Landing Gear Drag Strut - Inspection 8/65
Applicability: All Lake LA-4 Series.
Requirement: Inspect the bolt at the top of the nose landing gear drag strut at fuselage Station 12 5/8 to ensure that AN 5-16A bolt or an approved equivalent is installed and that the bolt head is on the right hand side of the aircraft. If an AN5-15A bolt is found installed it will be necessary to inspect the bolt holes in the drag strut and the supporting assembly for elongation and if worn rework in accordance with Lake Aircraft Division SL No. 11B dated February 22, 1965. All replacement bolts must be AN 5- 16A or AN 5-17A with the head on the right side of the aircraft.
AN 5-17A is used when bushings are installed.
Compliance: Before 30 September 1965.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate