Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
AlliedSignal (Lycoming) Turbine Engines - LTS 101 Series
AD/LTS/12 Cast Material Axial Compressor 12/95
Applicability: All LTS101 series engines
Requirement: Replace Part Numbers (P/N) 4-101-006-20, -21, -24, -26, -35, -36 and -40 cast material axial compressor rotors in accordance with the requirements of AlliedSignal (formerly Textron Lycoming) Service Bulletin (SB) LT 101-72-30-0088 Rev. 5.
Note: FAA Airworthiness Directive 95-16-04 refers.
Compliance: As detailed in the Requirement Document with a revised effective date of 9 November 1995.
Background: This Directive has been issued to remove from service certain cast material axial compressor rotors and replace those rotors with a wrought material axial compressor rotor. The requirement follows advice of 36 reports of cast material axial compressor blade failures. Compressor blade failure may result in power loss and an inflight engine shutdown.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate