COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES AIRWORTHINESS DIRECTIVE For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section. Luscombe Model 8 Series Aeroplanes AD/LUSCOMBE/3 Cleveland Wheels 12/2003 Applicability: All Luscombe 8 Series aircraft equipped with Cleveland Model 6:00 DMB Wheels, Assembly No. C-38500. Requirement: Remove the tyres and inspect the wheel flanges for fatigue cracks, using a dye penetrant inspection method. If cracks are found, before further flight, replace the affected part with a serviceable part. Note: FAA AD 48-08-02 refers. Compliance: Within 100 hours time in service after 27 November 2003, and thereafter at intervals not to exceed 100 hours time in service. This Airworthiness Directive becomes effective on 27 November 2003. Background: This Directive is issued following a review of current FAA Airworthiness Directives applicable to the type. David Villiers Delegate of the Civil Aviation Safety Authority 14 October 2003 The above AD is notified in the Commonwealth of Australia Gazette on 5 November 2003. Page 1 of 1