AD/LYC/76 Amdt 6 - Propeller Attachment Flange (Cth)

Federal Register of Legislation

Document text

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Lycoming Piston Engines

AD/LYC/76 Amdt 6

Propeller Attachment Flange 10/94

Applicability: All Lycoming O-360, IO-360, AIO-360 and AEIO-360 engines fitted with a light flange crankshaft and installed in an aircraft with a Certificate of Airworthiness in the acrobatic category or a Airplane Flight Manual approving aerobatic manoeuvres.

Note 1: For the purpose of this Directive, a light flange crankshaft is a crankshaft incorporating lightening holes in a 0.38" thick propeller attachment flange.

Requirement: 1. Carry out a visual inspection of the propeller attachment flange in accordance with Lycoming Service Bulletin No. 465C, "INSPECTION PROCEDURE I", or

2. Carry out a Magnetic Particle Inspection (MPI) of the propeller attachment flange in accordance with Lycoming Service Bulletin No. 465C, "INSPECTION PROCEDURE II", or

3. Carry out an Eddy Current Inspection (ECI) of the propeller attachment flange in accordance with a procedure approved by the Authority.

Note 1: FAA Airworthiness Directive 84-13-05 refers.

Note 2: Replacement of a light flange crankshaft with a solid flange crankshaft is the terminating action for this Directive. A solid flange crankshaft does not have lightening holes in the propeller flange and the flange can be 0.38" or 0.44" thick.

Compliance: Effective 15 September 1994:

1. Within 25 hours time in service, and thereafter at intervals not to exceed 25 hours time in service.

2. Unless previously accomplished, within 25 hours time in service, and thereafter at intervals not to exceed 110 hours time in service.

3. Unless previously accomplished, within 25 hours time in service, and thereafter at intervals not to exceed 110 hours time in service.

Read full text →

Official source

We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.

Not checked yet

Last checked with source on —

Open official source

Checking whether the official page can be embedded…

Study brief

Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.

Unknown

No study brief is cached for this law yet. Sign up to generate a plain-English brief.

You've got 21 of 22 free Acts left this visit. Sign up anytime for Facts, Related, and study briefs too.

Document text

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES

Lycoming Piston Engines

AD/LYC/76 Amdt 6

Propeller Attachment Flange 10/94

Note 1: For the purpose of this Directive, a light flange crankshaft is a crankshaft incorporating lightening holes in a 0.38" thick propeller attachment flange.

Requirement: 1. Carry out a visual inspection of the propeller attachment flange in accordance with Lycoming Service Bulletin No. 465C, "INSPECTION PROCEDURE I", or

2. Carry out a Magnetic Particle Inspection (MPI) of the propeller attachment flange in accordance with Lycoming Service Bulletin No. 465C, "INSPECTION PROCEDURE II", or

3. Carry out an Eddy Current Inspection (ECI) of the propeller attachment flange in accordance with a procedure approved by the Authority.

Note 1: FAA Airworthiness Directive 84-13-05 refers.

Compliance: Effective 15 September 1994:

1. Within 25 hours time in service, and thereafter at intervals not to exceed 25 hours time in service.

2. Unless previously accomplished, within 25 hours time in service, and thereafter at intervals not to exceed 110 hours time in service.

3. Unless previously accomplished, within 25 hours time in service, and thereafter at intervals not to exceed 110 hours time in service.

Read full text →