AD/M20/46 Amdt 1 - Radiant Heat Shield, V-Band Clamp and Hydraulic Poly Line (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/M20/46 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Mooney M20 Series Aeroplanes

AD/M20/46 Amdt 1

Radiant Heat Shield, V-Band Clamp and Hydraulic Poly Line

2/2005

DM

Applicability: Mooney model M20 M series aircraft, serial numbers 27-0001 through 27-0321.

Requirement: 1. Remove the existing radiant heat shield, part number (P/N) 600182-501 (A), and replace with the new radiant heat shield, P/N 600182-501 (B), and install the new heat shield deflector, P/N 600505-001 as per provisions of Mooney Airplane Company Service Bulleting (SB) M20-283A dated 30 March 2004.

2. Remove the existing V-band clamp, P/N 55677-340M or 40D21162-340M, and install the new V-band clamp, P/N NH1009399-10 or 40D23255-340M as per provisions of the SB M20-283A.

3. Modify the hydraulic brake fluid poly line as per provisions of the SB M20- 283A.

Note 1: If you have already incorporated all parts of SB M20-283 dated 03 January 2004, then you only have to replace the tailpipe V-band clamp with the new configuration V-band clamp, P/N NH109399-10 or 40D23255-340M.

Note 2: FAA Airworthiness Directive 2004-23-17 Amdt 39-13872 refers.