Federal Register of Legislation
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY SCHEDULE OF AIRWORTHINESS DIRECTIVES
Mitsubishi MU-2 Series Aeroplanes
11/98
Requirement: 1. Inspect the torque shaft (part number 030A-38605-21) for correct spline connection in accordance with paragraph 4 of Mitsubishi Heavy Industry MU-2 Service Bulletin (SB) 235, dated 4 August 1998.
2. If the distance measured in the Requirement 1 inspection is less than 12mm, before further flight, replace or modify the torque shaft assembly in accordance with paragraph 5 of SB 235.
Note: JCAB AD TCD-4838-98 refers.
Compliance: Unless already accomplished, within 100 hours time in service after 8 October 1998.
This airworthiness directive becomes effective on 8 October 1998.
Background: This Directive is to prevent disconnection within the landing gear drive train, which could result in a situation with the nose gear extended and the main gear retracted.
We try to embed the page this law was scraped from. If the site blocks framing, you still get the link and a local excerpt.
Last checked with source on —
Checking whether the official page can be embedded…
Plain-English simplify of this law: a short summary, key points, and both sides of the argument. Generated on first view via Replicate, then cached. Vote on what helps your study.
No study brief is cached for this law yet. Sign up to generate a plain-English brief.
Sign up to generate