AD/FU24/53 Amdt 2 - Flap Control Torque Tube - Inspection (Cth)

AIRWORTHINESS DIRECTIVE On the effective date specified below, and for the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/FU24/53 Amdt 1 and issues the following AD under subregulation 39.001(1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Airparts (NZ) Ltd. FU 24 Series Aeroplanes AD/FU24/53 Amdt 2 Flap Control Torque Tube - Inspection 5/2006

Applicability: All models. Requirement: 1. For FU 24 models engaged only in agricultural operations, inspect the Flap Control Torque Tube in accordance with NZ Aerospace SB No. ASB/FU/033, issued on 30 May 1977.

2. For FU 24 models engaged only in operations other than agricultural, inspect the Flap Control Torque Tube in accordance with NZ Aerospace SB No. ASB/FU/033.

3. For FU 24 models engaged in mixed usage operations (i.e. a combination of agricultural and non-agricultural operations), inspect the Flap Control Torque Tube in accordance with NZ Aerospace SB No. ASB/FU/033.

Accomplishment of Department of Aviation (now CASA) approved SuperAir Engineering Order S46 Issue 1, approved 17 April 1980 is terminating action for all of the requirements of this AD.

Note 1: SuperAir Engineering Order S46 Issue 1 modifies the torque tube outer attachment lugs, by welding re-inforcement strips to the existing lug material, providing greater cross sectional area and stiffness and eliminating susceptibility to fatigue cracking.