Vehicle Standard (Australian Design Rule 18/03 – Instrumentation) 2006 (Cth)

Vehicle Standard (Australian Design Rule 18/0318/03 – InstrumentationInstrumentation) 2006 I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 26 April 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

0.1. NAME OF STANDARD........................................... 0.2. COMMENCEMENT.............................................. 0.3. REPEAL....................................................... 1. function and SCOPE.............................................. 2. APPLICABILITY AND IMPLEMENTATION......................... 3. DEFINITIONS................................................... 4. REQUIREMENTS................................................ 5. EXEMPTIONS AND ALTERNATIVE PROCEDURES 6. ALTERNATIVE STANDARDS APPENDIX A

0.1. NAME OF STANDARD 0.1.1. This Standard is the Vehicle Standard (Australian Design Rule 18/03 – Instrumentation) 2006.

0.1.2. This Standard may also be cited as Australian Design Rule 18/03 — Instrumentation.

0.2. COMMENCEMENT 0.2.1. This Standard commences on the day after it is registered.

0.3. REPEAL 0.3.1. This Standard repeals each vehicle standard with the name Australian Design Rule 18/03 — Instrumentation that is:

(a) made under section 7 of the Motor Vehicles Standard Act 1989; and

(b) in force at the commencement of this Standard.

0.3.2. This Standard also repeals each instrument made under section 7 of the Motor Vehicles Standard Act 1989 that creates a vehicle standard with the name Australian Design Rule 18/03 — Instrumentation, if there are no other vehicle standards created by that instrument, or amendments to vehicle standards made by that instrument, that are still in force at the commencement of this Standard.